Morrow Audio interconnects top the industry...
“Using Morrow cables, Legacy has received numerous ‘best of show’ accolades at audio shows around the country.” - Bill, Dudleston, President, Legacy AudioLearn More
Morrow Anniversary Line
Can anything be better than the Elite? Morrow does it again! Interconnects, Speaker Cable & Power CordLEARN MORE
NEW! Jolida Foz XT-R Crosstalk Reduction DeviceLearn More
NEW! Legacy Focus XD
Simply an Awesome Experience!LEARN MORE
Plug into the power of Morrow
Replace your stock power cords or upgrade. The improvements are amazing!LEARN MORE
DAC 100 is a non–oversampling, no upsampling design with multi–bit dac chips. The carefully designed power supply is with shunt regulators. I/V conversion is done by a specially designed, built in house transformer. Τhe analog stage uses single-ended class A transformer coupled triodes with valve rectification and choke regulation. The valves are the high mu, high transconductance, low noise SIEMENS C3g NOS tubes.
There are two available inputs:
- SPDIF coaxial 75Ω with next gen connector This input can be used with our CDT 100 Drive, or other high quality transports.
- Neutric 5 pin analog current input When this input is used with CDT 100 the digital part of the dac is disabled and is powered off. Only the analog section is used. With CDT 100 we strongly recommend the use of this input for optimum performance.
The conclusion has been reached that by using this 5-pin connector the signal is transferred to the analogue section of the DAC 100 at an absolute optimum sonic capacity avoiding all the limitations of digital interfacing.
All transformers are designed and built in house using the best available materials and are wound with sophisticated techniques for a totally transparent sound. The transformers are of enormous size in order to achieve the absolute performance we seek. We believe the DAC 100 reaches the limits of digital reproduction and can be compared only with the best analogue sources. The DAC 100 D/A converter is also 24bit/192Khz capable when used in high resolution digital sources.
Product Specifications: Digital Input: SPDIF (75 Ohm) RCA
Analog Current Input: Ypsilon 5 pin connector
Analog Outputs: RCA unbalanced XLR balanced
Nominal Output: 2V rms
Power Consumption: 40W
Dimensions: 15.75 x 15.75 x 7.1" (WxDxH)
Weight: 55 lbs.
Customization options available at checkout.